ROUTERS FLASH WITH OPENWRT AND SHAAS API
To do this, follow the following instructions
We will perform the Flashing and the Activation of the Routers, to leave the equipment ready for delivery to the client.
1 - Install the App Shaas
2 - Start Reseller
3 - Download the correct firmware according to the router
Login to the link and download the correct firmware from the OpenWRT site or from our Storage of tested firmware:
Firmwares OpenWRTFirmwares Test by ITCx
4 - Flash of Firmware. Exist 3 Options.
There are 3 ways to flash teams and let them walk with both OpenWRT and Shaas.
The 3 forms arrive at the same result, but it is always convenient to work with our Firmwares, since in addition to being faster the process, is tested the good operation.
Option 1
Using our firmware, which can be obtained from the link in step 3. And using the Router’s Web Interface to Flash the computer.
Option 2
Using our firmwares, which can be obtained from the link in step 3. And using TFTP to Flash the computer.
Option 3
Using an original OpenWrt firmware, which can be obtained from the official site. And using the Web Interface of the router to flash the computer and install the shaas package.
Option 1
Option 1: From Web Access with our Firmawares.
Follow this 3 steps and you will have you router withOpenWRT and Shaas.
Access the menu option: System Tools -> Firmware Upgrade, Select the file you downloaded from our Firmware Repository, press Upgrade
*Important note: some models do not support such long names in firmware files so after downloading it should be renamed, eg: firmware.bin
Next, the shaas software has already been flashed and installed, only activates shaas-premium
The router is located at http://192.168.54.1
The device starts up with the following pre-set configurations:
-
User management WEB: admin, password: shaas
-
User for ssh: admin, password: shaas
-
Password for the shaas application: shaas
-
WIFI network: same as the base of the router set by TPLINK [Eg: TP_LINK_25B2]
-
Pass Wifi: same as the pin on the base of the router where it says wireless password / PIN
For the Activation continue with the detailed steps on our website here
Option 2 (Ubuntu)
Option 2: From TFTP.
Follow this 9 steps and you will have the router with OpenWRT and Shaas.
1. Place the router firmware in the root directory (/) of the TFTP server
a. Download the firmware of the firmware repositories of ITCx, the names of these firmwares for TFTP carry the model of the computer, version and at the end the word recovery.
b. The downloaded firmware should go to: /var/lib/tftpboot/
1. Set interface of the PC that has the server TFTP en la IP: 192.168.0.66
sudo ifconfig eth0 192.168.0.66 up
With the router OFF, connect the PC to the router in a LAN mouth without anything connected in the Internet mouth.
Press the reset button on the router to turn it on and hold the reset for 20 seconds. Steady light led: power / star system / reboot
In case of success if you take IP with the PC connected to the LAN, you should receive an IP address of the network: 192.168.54.xx / 24, the router is left with the power / system leds and the lan is connected
Next, the shaas software has already been flashed and installed, only activates shaas-premium
The router is located at http://192.168.54.1 The device starts up with the following pre-set configurations:
- User management WEB: admin, password: shaas
- User for ssh: admin, password: shaas
- Password for the shaas application: shaas
- WIFI network: same as the base of the router set by TPLINK [Ex: TP_LINK_25B2]
- Pass Wifi: same as the pin on the base of the router where it says wireless password / PIN
For the Activation continue with the detailed steps on our website here
Here you can define the content that will be placed within the current tab.
Option 2 (Windows)
Option 2: From TFTP.
Follow this 9 steps and you will have the router with OpenWRT and Shaas.
1.Place the router firmware in the root directory (/) of the TFTP server
a.Download the firmware of the firmware repositories of ITCx, the names of these firmwares for TFTP carry the model of the computer, version and at the end the word recovery.
b.The downloaded firmware should go to: C:\Program Files\Tftpd64\firmware
1. Execute TFTPD
a. Select Server interfaces (192.168.0.66).
b. Select Current Directory
c. With the router OFF, connect the PC to the router in a LAN mouth without anything connected in the Internet mouth.
Press the reset button on the router to turn it on and hold the reset for 20 seconds. Steady light led: power / star system / reboot
In case of success if you take IP with the PC connected to the LAN, you should receive an IP address of the network: 192.168.54.xx / 24, the router is left with the power / system leds and the lan is connected
Next, the shaas software has already been flashed and installed, only activates shaas-premium
The router is located at http://192.168.54.1 The device starts up with the following pre-set configurations:
- User management WEB: admin, password: shaas
- User for ssh: admin, password: shaas
- Password for the shaas application: shaas
- WIFI network: same as the base of the router set by TPLINK [Ex: TP_LINK_25B2]
- Pass Wifi: same as the pin on the base of the router where it says wireless password / PIN
For the Activation continue with the detailed steps on our website here
Opción 3
Opción 3: Desde acceso Web.
Sigue los siguientes 8 pasos y tendrás tu router con OpenWRT y Shaas instalado.
Accede a la opción de menú: System Tools -> Firmware Upgrade, Selecciona el archivo que descargaste en el paso 2), presiona Upgrade
*Nota importante: algunos modelos no soportan nombres tan largos en los archivos de los firmwares por lo que después de bajarlo conviene renombrarlo, por ej: firmware.bin
Después del reinicio accede al router [ default http://192.168.1.1/ ]
Clickea en Login, luego en Go to password configuration.
Aquí configuramos las credenciales:
● El password con el que tendrá acceso desde la app el cliente. Recomendamos que sea un dato fácil de recordar, en nuestro caso configuramos un número entero de 6 dígitos completamente al azar, (ej: 687521). ● Damos en “Save and Apply”
Configura el acceso a Internet del Router, necesitarás que esté conectado a Internet para poder instalar el software de SHAAS.
Accede a System -> Software-> Configuration y realizaremos dos cambios:
- En el caso de poseer la siguiente línea: option check_signature 1
La comentamos, ingresando un signo numeral delante (#) Posteriormente presiona SUBMIT.
src/gz shaas-api http://downloads.itcx.io/shaas-api/chaos_calmer
Posteriormente presiona SUBMIT
Luego accede a System -> Software-> Actions y haz click en Update Lists, y esperamos a que aparezca la lista de paquetes actualizada, para luego instalar el paquete shaas-api, colocando shaas-api en el campo ‘Download and install package’ y presiona OK.
Esperamos el siguiente mensaje de éxito: